|
Chlorine, the most uniquitous disinfectant, is used in many treatment applications; from potable water, wastewater, to food indusry and swimming pools. This meter is an auto-diagnostic portable photometer for accurately measuring free chlorine. The advanced optical system employs a specialized tungsten lamp and a narrow band interference filter, assuring accurate readings between 0.00 to 5.00mg/L. This instrument is equipped with Cal Check validation function and standars to validate good performance at any time. Taking just a few short steps, the validation procedure is user-friendly and ensures that the meter is properly calibrated wherever you go. NIST traceable standards.
Cuvets are constructed from specialized optical glass to ensure the best and most consistent results. The positive locking system ensures that the cuvet is in the same position every time it is placed into the measuring cell. Our sample cell is designed to fit a cuvet witha wide neck to make it easier to add both sample and reagents. All instruments are factory calibrated and the electronic and optical design minimizes the need for frequent calibration. Display messages aid the user during routine operation.
The auto-off feaure will disengage the meter after 10 minutes of non-use in measuring mode or 1 hour while in calibration mode. Reagents are in powdered form and are supplied in packets.
Supplied with 2 sample cuvettes with caps, 9 V battery and instructions.
|
