|
HI 8633 has been designed specifically for use in areas of production and quality control. It is often necessary to test samples with different concentrations ranging from deionized water to brine.
The amperometric system would require constant recalibration and probe changes, thus making the measurement process very time consuming and unreliable. To solve this problem, HANNA® has developed the HI 8633, which uses a 4-ring potentiometric probe. The rugged probe is made of PVC - ideal for indoor, as well as outdoor measurements.
By using one point calibration, it is now possible to obtain accurate readings across a very wide range, from 0.1 to 199900 µS/cm.
As an accessory, the HI 721313 is available. The kit includes a rugged carrying case with a beaker, a calibration screwdriver and standardizing solution at 12880 µS/cm.
- Range: 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
- Resolution: 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
- Accuracy: ±1% F.S. (excluding probe error)
- Calibration: manual, 1 point
- Temperature Compensation: manual, 0 to 50°C (32 to 122°F) with ß=2%/°C
- Probe: HI 76301D with 1 m (3.3') cable (included)
- Battery Type / Life: 1 x 9V / approx. 100 hours of continuous use
- Environment: 0 to 50°C (32 to 122°F); RH max 100%
- Dimensions: 164 x 76 x 45 mm (6.4 x 3.0 x 1.8")
- Weight: 250 g (8.8 oz.)
HI 8633 is supplied with HI 76301D conductivity probe with 1m (3.3') cable, calibration screwdriver, instruction manual and 9V battery.
|
5.00
(5 of 5)
