|
Specifications:
- Range is –58.0 to 500.8°F and –50.0 to 260.0°C
- Resolution is 0.1°
- Accuracy is ±1°C · Unit size is 2 x 4 x 1/2 inches
- Probe dimensions: 0.14 inch diameter, 7-1/4 inch length, and 3 foot cable length
- Weight is 3 ounces
- Thermometer and countdown timer
- Programmable Hi/Lo alarms
- Max/Min temperature readings
Affordable routine thermometer now has extra features
At the touch of a button, display temperatures from –58.0 to 500.8°F and –50.0 to 260.0°C, switch from °F to °C, or set high/low alarms.
Ideal for all solutions
This is the thermometer to use in foods, soils, cuvets, water baths, wastewater, and incubators. Resolution is 0.1° and accuracy is ±1°C.
Always-on monitoring
Thermometer monitors temperature around the clock. Single battery runs continuously for 1 year. One-half-inch high display is readable from 10 feet. Thermometer automatically watches solutions. Both a high and low alarm may be programmed in 1° increments. When temperature rises above or falls below set points, a 1-minute audible alarm signals an out-of-range condition. Alarm automatically resets when temperature returns to in-range reading. Alarm mode may be switched off when not required.
Timer counts down from 99 hours, 59 minutes and may be set 1-minute increments. When zero is reached, a 1-minute alarm sounds, and TIMER flashes until a button is pressed.
Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability, for temperature only, to standards provided by NIST (National Institute of Standards and Technology). Probe clips to unit for handy storage. Stainless-steel probe has a diameter of 0.14 inch, a length of 7-1/4 inches, and a cable length of 3 feet. Size is 2 x 4 x 1/2 inches and weight is 3 ounces. Comes with flip-open stand for bench use. Supplied complete with probe, AAA battery, and Traceable® Certificate. Replacement battery 1105.
|
